The carpet can not only be laid to the floor, it can also be attached to the stairs. But how to do it correctly, so that the carpet does not fall from the steps and, no one was jumping on it? It is impossible to save, in this case, the carpet should be of high quality and reliable, with increased wear resistance. The cheap carpet will quickly become erased, and its basis will become visible that it will ruin the whole view. By the way, the 1C setting up is different for each programs, go through the specified link and you will learn a lot of useful and interesting information about all 1C settings and t. D.
The carpet for the stairs must be selected heavy based on textiles, a lining, which is very durable, so that it could withstand the intensive movement of the residents of the house on the stairs. It is better if it is rubber, having a waffle surface or ordinary felt surface.
In order to reduce the load on the rollers of the stairs, you need to place the carpet with fibers in the direction down to the rollers of the steps. Otherwise, the carpet will not last long, and this is unprofitable for the owners of the house.
The carpet is often laid from one wall to the other, or from the wall to the railing of the railing, but so, you can lay a narrow strip in the middle of the steps on the stairs, it is easy to remove and apply it to another staircase.
If a narrow strip of the carpet, then the lateral open parts of the stairs can be painted or covered with a layer of varnish on the stairs. The carpet is fixed with nails with a wide hat or glued with glue.