After the double -glazed window is installed, it is necessary to move on to such a responsible stage as the creation of slopes. Slopes are needed in order to eliminate and hide unpresentable potholes and cracks formed during the installation of the window. There are several possible options for creating slopes, while everyone chooses for themselves a more attractive and affordable.
If there is limited financial terms, then the best option is to use the plaster to create slopes. Here we need a mixture of gypsum and cement, as well as a little water, for inexperienced builders this is not a very simple method for creating slopes. Before starting work, you need to prepare the surface. Near the window the walls are cleaned of dirt and dust, as well as various influxes from cement. For a good and durable clutch of cement with brick masonry, the seams in this masonry by 1 cm are extended. Before repair, do not forget to visit the site and buy inexpensive plumbing there.
Each layer can be laid only after the previous. The slope begins to do after plastering the wall adjacent to the window. Sometimes work on the creation of slopes can take more than one day, but two or even three days. When the window is disconnected, the distance is about 2 cm to the end, a cement-gypsum solution will be laid here. A little solution is applied to the sloping grooves and it is leveled. Driving occurs from the bottom up, moving to the sides. It is necessary to equalize a special tool, which is called the half -ather.