Very often, during operation, wooden floors lose their original appearance. The boards have such a negative property as, to sit down and wear out. And then, such a gender needs repair work. You can repair the wooden floor with your own hands without resorting to the help of specialists. Before starting repair work, carefully inspect the floor and determine its design.
Looking for a company to develop and coordinate environmental documentation? We advise you to follow the following link where you can get a dangerous waste passport in St. Petersburg.
Repair work should be done in the next sequence. First you need to remove the baseboard, then the boards rise with the help of tools. Nails must be pulled out using special forceps. After you replaced damaged boards with new ones, they must be connected with wedges. And after that, each board must be beaten with nails. Nails must be drowned a couple of millimeters in the board. After that, you can mount a plinth to your former place.
If small cracks have formed in the wooden floor, then you can do without sorting the floor. They can be easily laid by slats that you will need to fit the formed gap in the form. In order to repair the floor in which the cracks formed, it is necessary to clear these cracks and make planks, preferably from soft and dry wood.
In order to not get the floor during the repair work, you can use the adhesive or simply with dense paper, which should be closed around your repair work.
If you need to remove part of the rotten board, remember that the area adjacent to it may also be infected. Therefore, it is necessary to remove the board, slightly in length and width.