Scientific and technological progress, which gave us a large number of new materials, does not interfere with the traditional materials that are made of natural raw materials, do not go into the past. One of these materials can be called plywood. In plywood, the structure is a few sheets from the sprouted veneer, which are pressed to each other very tightly on glue.
A thin sheet of wood with a variable thickness, which is obtained due to the beam of the churak, is called a sheet of the sprouted veneer. Special lounger machines are used for vanity. Churak is called a segment of wood, which has a cylindrical shape. It rotates on the machine, and the knife moves along the axis of rotation of the cylinder. At the exit, the pierced veneer is an uninterrupted tape, the width and thickness of which is set in advance.
A tree of various breeds is used for the production of veneer. In order for wood to have the necessary elasticity, temperature treatment occurs before the machine, which is a boiling in water at a temperature of about 50-60 degrees. With special scissors, the resulting tape is cut into the sheets according to the specified sizes. Then they are dried, cut and sorted.
Plywood has many advantages that other well -known lumber do not have. They are that plywood has uniform strength in all directions. The surface does not warp and does not crack over the years. It is fashionable to bend her, due to which it is extremely convenient in transportation, installation and operation.
High -quality plywood with delivery by Kyiv and region to Fanera. HTML.
The traditional use of plywood is furniture production. But now plywood is used in other areas – in the decoration and repair. Unique heat – and soundproofing properties allow the faner to act as the basis for flooring such as parquet, linoleum and carpet.
Plywood is common in design. Its light weight makes it possible to create volumetric structures, which in a matter of minutes can be easily and in a short time to disassemble and move for assembly in a new place.
Scientific and technological progress, which gave us a large number of new materials, does not interfere with the traditional materials that are made of natural raw materials, do not go into the past. One of these materials can be called plywood. In plywood, the structure is a few sheets from the sprouted veneer, which are pressed to each other very tightly on glue.
A thin sheet of wood with a variable thickness, which is obtained due to the beam of the churak, is called a sheet of the sprouted veneer. Special lounger machines are used for vanity. Churak is called a segment of wood, which has a cylindrical shape. It rotates on the machine, and the knife moves along the axis of rotation of the cylinder. At the exit, the pierced veneer is an uninterrupted tape, the width and thickness of which is set in advance.
A tree of various breeds can be used for the production of veneer. In order for wood to have the necessary elasticity, temperature treatment occurs before the machine, which is a boiling in water at a temperature of about 50-60 degrees. With special scissors, the resulting tape is cut into the sheets according to the specified sizes. Then they are dried, cut and sorted.
Plywood has many advantages that other well -known lumber do not have. They are that plywood has uniform strength in all directions. The surface does not warp and does not crack over the years. It is fashionable to bend her, due to which it is extremely convenient in transportation, installation and operation.
The traditional use of plywood is furniture production. But now plywood is used in other areas – in the decoration and repair. Unique heat – and soundproofing properties allow the faner to act as the basis for flooring such as parquet, linoleum and carpet.
The plywood is common in design. Its light weight makes it possible to create volumetric structures, which in a matter of minutes can be easily and in a short time to disassemble and move for assembly in a new place.