If you want to order a turnkey house heating, then you should contact the company “Stroy Good”. The company carries out high -quality installation of heating systems at favorable prices.
In winter, many are freezing in their apartments and houses. Therefore, they think about how to insulate housing. Experts distinguish four main causes of heat loss in the house.
1. Cold walls. This happens very often in old houses. The solution loses its strength over time and becomes unusable. In panel houses, this happens due to poor-quality seams between the panels. There is a way out of this situation – it is to insulate the walls with polystyrene foam from the outside (facade). Such insulation is done only when the street is warm. You can of course insulate from the inside, but after that you need to do major repairs.
2. Slits in the windows. You can plug the foam into the cracks and seal with paper on top. Or change the windows to new. Choose windows with triple glass, then they will protect you well from heat loss.
3. Doors. It happens that the front door does not fit well to the frame and in this regard, drafts appear in the apartment. Buy a special adhesive tape in the store, stick on the door and will not leave warm. In interior doors, also install hermetic gaskets, they will prevent draft.
4. Poor heating. If you have insulated everywhere, but the apartment is still coldly possible in heating. If the radiators are warm, then the pipes are possible are clogged with slag and they need to be cleaned. If your pipes are new, it means that the master incorrectly installed the system. If your curtains are dense, then raise them up. They do not allow warm air to circulate well.