Arched corners can align the design of an arch of any shape, even if during installation there are any irregularities or other defects in the design of the arched structure. When cutting, they (that is, arched corners) can take any geometric stereometric shape in three -dimensional space. These very arched corners can be made of materials such as cork or plastic (PVC, that is, polyvinyl chloride, from which now only food is not made). The surface of the wall or ceiling of the apartment where the arched corner will be fixed should be clean and dry, without traces of fat and dust. Accordingly, before the installation of the arched corner or arched corners, the place or place of installation of the arched corners should be cleaned.
Looking for tours tours at favorable prices? Then we advise you to follow the following link where you can buy tours tours at low prices. You can familiarize yourself with the proposed products on the company’s website.
When using a plastic arched corner, liquid nails must be applied to the inside of the product and attach to the wall. If desired, at first, the angle is applied without an adhesive composition to indicate the desired shape, and then finally glue. Also, the product can be fixed with sealant or ordinary nails without hats. When clogging nails, you need to be careful so that brackets and cracks do not appear on the surface.
When using a cork arched corner, the glue is mixed and distributed into both glued parts. Within 15-20 minutes, the glue should be absorbed, where the surface will be moistened. Then the corner with all bends is pressed against the wall. When maintaining the structure with your hand, you need to tap it with a rubber hammer. Extra abstracts of the glue are removed with a rag, and for complete grasping it will take about an hour of time. Then the surface can be painted or covered with wallpaper.