To prevent the excess moisture of windows made of plastic, as well as related, little desirable consequences should be comprehensive care, which contains the following points:
1. When airing, the windows must certainly be wide open, and not only ajar, this will allow the room to ventilate the most efficiently and quickly.
2. All rooms must be ventilated twice a day for 10 minutes.
3. You need to constantly monitor the temperature in the room, it should not drop less than 16 degrees.
Ventilate the room
All PVC windows when closed almost completely no air pass. This can lead to the appearance of humidity in space (as a rule, most often in the kitchen). In order to prevent this, you need to reduce moisture in the room due to ventilation. This method does not need any additional costs or acquisition of the air ventilation system. The access of the warm -up air flow from the battery will help prevent winding windows.
Courting for seals
Rubber seals are made of a special type of material, but which eventually loses its qualities. In order to slightly increase the duration of the service of this material, which delays cold drafts, showers and at the same time remains elastic, should be processed a couple of times a year with intended compounds and thoroughly clean it from dirt. For such processing, a fabric with good absorbent characteristics should be used. Such a seal processing will allow him to maintain his waterproof and elastic properties for a long time.
Supportion
In the bottom of the profiles there are special channels that are needed to remove the humidity formed inside the profile. These channels should be cleaned from time to time from pollution.
Furniture of plastic windows
In order to increase the service life, it is necessary to smear its components with special oils without the content of acids and resins at least once a year.