Sometimes the old wooden floors in private houses are rotten due to the fact that in the room there is increased humidity or boards that were not properly processed, the beetle sharpens the beetle. In such cases, the boards can and should be replaced with new. You will need to remove the flooring from old boards, and put new well -dried boards on transverse lags. Floor boards should be 50 mm thick. They need to be prepared in advance, measuring the length and numbered each board, so that it subsequently takes its place.
The boards are dried for a fairly long period, and, throughout the entire time, they should not constantly lie in the same position in the stack, they need to be periodically turned over, about half a year. This is done so that the boards curved in one position do not dry out in this way.
Dried boards can be attached to transverse lags with self -tapping screws or nails. Self -tapping screws need to be selected such a length that they are twice as long as the thickness of the board. They need to be screwed perpendicular to the boards and lags. The nails must be driven down, and the slope of all nails should be different. The length of the nails should be three times larger than the thickness of the boards, that is, 1, 5 . With the flooring of the boards of such a thickness, you need to keep in mind that the distance between the axes of the lag should be no more than 80 cm., In addition, the boards need to be laid close to each other.
The comfort of our life directly depends on the quantity and quality of the surrounding objects, among which in the forefront, of course, the furniture is. In accordance with this, we offer to buy a cabinet inexpensively in our online store. It is made of natural pine, which is environmentally friendly and very functional.