The broken board is visible immediately, but the rotten area is determined by the sound: when tapping it, it makes a dull sound. Suppose we need to replace only one floor board. Replacing one plank in the floor is not so easy. First you need to find out which side the crest is located on, and with which – the groove. On the right and on the left side of the board, drill neat holes. Through them, we find a side with a comb and carefully saw off the comb so that you can clarify and pull out the entire board (mount will help here). Using a screwdriver, remove a sawn comb from the groove of a neighboring board. When working, we must try not to damage neighboring boards. The new board should not differ from the old.
It’s good if you have spare boards left after laying the floor. If the board is thinner – you can put a thin plank under it, if thicker – it is opened with a shirt. In any case, the boards should form a flat surface. If the new board is wider or already old, you will have to work on a workbench to achieve the right size. So that the plank rises in its place, you need to focus a bit of the crest a little. Now he will enter the groove of a neighboring board. We lay the plank in place.
Currently, corner cabinets are very popular as furniture for a room or for the hallway. Such cabinets allow you to place a lot of clothes in a relatively small space. This becomes possible due to the fact that an angle that is not used in conventional cabinets is very effectively involved.