Installation of metal tiles cannot be called difficult, although it needs to be approached with proper liability and awareness. In the course of the installation of metal tiles, an overlap is laid. It is attached with the help of special fasteners, or rather, with the help of special screws on which a special sealing washer screwed up. This washer differs its width and in that with the bottom there is a rubber seal, which, when twisting these screws, effectively sealing the hole. By the way, do not forget the fireplace for the summer residence so that it would warm up so that it is not cold in winter.
It is worth noting that using a metal tile to organize a roof, it must be taken into account that it is very noisy, with rain. Therefore, the use of this material requires serious sound insulation of the roof. Otherwise, summer rains will not give rest.
The installation of the tile should be carried out only by specialists, otherwise in the first wind its sheets will fly from the roof to the neighboring garden, as they say to the chickens.
Covering the roof of a metal tile, it is necessary to ground it. In other words, install a lightning receiver with the lifting of the charge into the ground. Otherwise, when lightning enters the metal tile, a crate may light up from it, with all the ensuing. In addition, all electrical engineering in the house may suffer from an electric charge.