During the construction of wooden houses, it is necessary to take care of how to conduct floor insulation in a wooden house, since without carrying out such a procedure in the winter period in the house can be quite cold, since all the heat disappears through the flooring of the floor, and it is possible to pass cold air streams from the basement.
It is most advisable to conduct floor insulation in a wooden house during its construction, since when implementing it after, it will be necessary to completely tear the floor, lay the insulation, after which it will be necessary to re -lay down the floor.
At the moment, a large number of methods and methods of warming houses in wooden houses have been developed at the moment. The best can be called the use of foam insulation.
But the simplest are methods such as applying putty to the surface of the floor. For this, putty is preliminarily prepared, which is applied to the floor, which should also be properly prepared. After the putty dries, it is thoroughly cleaned using sandpaper. Having completed the implementation of this procedure, the floor surface is carefully glued with ordinary paper. Then, when the glue is completely dry, the flooring of the floor is covered with a layer of putty, primed and painted. If you set out to get an unusual pattern on the flooring surface, then after alignment on the floor you need to stick a fabric with the selected pattern. To implement an additional layer of floor protection from moisture, it must be covered with a special gender varnish.