Installation of a stretch ceiling is a rather complicated business that requires the availability of the necessary tools and professionalism. Therefore, special teams of workers are engaged in this. The main thing to do the owner to give the company to make the ceilings the exact measurements of the future ceiling and prepare the room. Everything is clear with the dimensions, here you just need to measure the length of the wall walls directly under the ceiling, although you can call a specialist from the company for installing stretch ceilings for this, which will install the ceiling.
If you want to buy an aluminum system, but don’t know where? We advise you to buy here. UA new inexpensive aluminum system.
But in order to prepare the room you will have to work a little. Firstly, you need to either even remove all the furniture from the room or move it in such a way that it does not interfere with the installation. To do this, it is necessary to move it away from the walls so that there is the possibility of unhindered bagette mounting. Secondly, you need to prepare that part of the surface of the walls that will be closed by a stretch ceiling.
It is necessary to tear off the wallpaper and other materials from the wall, if they are there, since during the installation process they will be exposed to very high temperatures created by the heat gun. The process of installing a stretch ceiling itself is very fast, it takes a couple of hours. In addition, this process is not the reason for the formation of garbage and dust, except for the dust that appears after drilling the wall to install fasteners.
It is practically not required to care for a stretch ceiling, but with regard to the possibility of any repairs, it all depends on the method of fixing the canvas of the stretch ceiling. The fact is that two methods of fastening are used, one is a harpoon method, and the other is an airbuilding. The harpoon method is distinguished by its high cost, but at the same time it makes it possible to dismantle the ceiling for the necessary repair. As for the non -carpation method, it is respectively a cheaper method of installation, but at the same time does not allow dismantling.