Sometimes, after a long and tiring repair, it can be found that the wallpaper is bent and in some places completely depart from the walls. Most likely, you did not observe some subtleties when gluing. To avoid such misunderstandings, take the surface of the walls seriously, all the old layers of wallpaper and a loss must be removed, and the walls should be treated with a special composition.
Looking for a good site on which you can find out how much tours to Thailand from Tula cost? You can find out their exact price on this site .
In addition, you could bring you the glue that you used. Check the expiration date for the purchase, and buy glue from reliable manufacturers. You need to breed glue strictly according to the instructions and not save. Better buy one more than then glue shreds throughout the apartment. When choosing glue, take into account the type of wallpaper that you will glue. Thick varieties are needed for dense wallpaper.
Apply the glue evenly, do not let the areas. After gluing, the wallpaper should dry. The most important thing is that there are no drafts, do not open the windows and doors, in the hope that the wallpaper will dry better, quite the other way around! Wallpapers will peel off in whole pieces. The optimum temperature is +25 degrees, and the wallpaper dries completely in two days.
If the wallpaper is left, apply glue on them again and wipe with a dry rag. If bubbles have formed on the wallpaper, try to use the syringe. Having collected PVA glue in a syringe, pierce the bubble with a needle and squeeze it out a little, then gently wipe it with a rag to remove the remains of the glue and leve the surface.
Check that the glue is squeezed through the needle of the syringe, for this, dilute it with water to the desired consistency. And in order not to stain the surface of the wallpaper with glue, you can initially glue the adhesive tape to this place, make sure that the tape or tape will not tear the wallpaper elements when removing.