Recently, the production of modern European repair has become increasingly relevant – renovation. More information can be found by following the following link:
The suspension ceiling is made of drywall. Such material is universal, because it is used for almost any work and the ceiling is not an exception. Consider this area in more detail and figure out how to use drywall to device a single -level suspended ceiling.
First of all, it is necessary to carry out preparatory work, which implies in advance to prepare a construction tool, with the help of which the work itself will be performed. First of all, it is a hydraulic level, the length of which should be equal to the diagonal of the room plus 0.5 m, you will also need a punch, a screwdriver, a hammer, scissors that cut the metal.
First of all, it is necessary to mark the height of the ceiling. Its level is lower. This is done in order to install the bars for fastening the canopy. After that, you need to designate high -altitude tags with an interval of 3 m and place them around the perimeter of the ceiling. Now you need to develop a sketch, how the sheets will be located, their shape and installation circuit on the stream. After you have decided on this, we proceed to the fastening of drywall sheets on the ceiling using a screwdriver, resorting to the help of a hydraulicarian so that the surface is even, and the joints are processed and tightly shut. After performing such work, our ceiling can be brought into aesthetically beautiful view. To do this, you can use paint.